GEPRC TAKER F405 HD V3 Flight Controller 65A 60A 4IN1 ESC 42688-P Gyro Data Analyze Record Flight Barometer Racing FPV Drone

Specifications--GEP-F405-HD V3 Flight Controller

• MCU：STM32F405

• IMU：ICM42688-P(SPI)

• Air Unit Connection：Direct plugging into D JI Air Unit

• Black Box：16M onboard

• Barometer: Supported

• Motor outputs：M1-M6

• USB Interface：Type-C 

• OSD：BetaFlight OSD w/ AT7456E chip

• BEC：5V@3A,12V@2.5A dual BEC

• Firmware Target：GEPRCF405

• Mounting: 30.5x30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle

• Input Voltage：3-6S LiPo 

• UART：6 UARTs

• Power Filter：Integrated LC filter

• Weight：7.3g

Includes

1 x Flight Controller
1 x D JI Air Unit Adapter Cable
1 x Flight Controller Adapter Cable
4 x Nylon nuts
4 x Silicone grommets
2 x sh1.0 4-pin ribbon cable
1 x Camera connection cable

Specifications---GEPRC TAKER H65_8S_BLS 65A 4IN1 ESC

• Input Voltage: 3-8S Lipo

• Ammeter: Support

• Continue Current：65A

• Burst Current：70A（5 second）

• Support Protocol: Dshot 150/300/600

• Size：42x45.7mm，hole30.5x30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

• Weight: 14.9g

• Target: B_X_30

Includes

1 x ESC
1 x Capacitor
1 x Flight Controller Adapter Cable
1 x XT60 Power cable
4 x Silicone anti-shake pads

Specifications---TAKER H60_BLS 60A 4IN1 ESC

• Input Voltage: 3-6S Lipo

• Ammeter: Support

• Continue Current：60A

• Burst Current：65A（5 seconds）

• Support Protocol: Dshot 150/300/600

• Size：42x45.7mm，Mounting Holes: 30.5x30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

• Weight: 14.9g

• Target: B_X_30

Includes

1 x ESC
1 x Capacitor
1 x Flight Controller Adapter Cable
1 x XT60 Power cable
4 x Silicone anti-shake pads