GEPRC TAKER H743 BT 32Bit 50A Stack GEP-BL32 50A 96K 4IN1 ESC Dual Gyro Data Analyze Record Flight Barometer Racing FPV Drone

Summary

  The TAKER H743 BT 32Bit 50A stack is the latest stack system developed by the GEPRC team. It features a high-performance STM32H743VIH6 chip with a Cortex-M7 core running at up to 480MHz, handling both racing and freestyle flights with ease. Its dual gyroscope setup, using MPU6000 and ICM42688-P, ensures precise control. With integrated Bluetooth for wireless parameter adjustments and a built-in 512MB black box, it’s well-equipped. It also offers eight motor output ports and is compatible with X8 models.
Compatible with Betaflight, INAV, and Ardupilot, it ensures flexibility. The dual independent 5V@3A + 12V@2.5A BEC ensures stable charging and motor voltage options. Features include seven UART ports, an integrated barometer, and plug-and-play functionality. With the GEP-BL32 50A 96K 4IN1 32Bit ESC, it delivers an exceptionally smooth flight experience.

Features

1. Adopts the high-performance STM32H743 as the main controller
2. Equipped with MPU6000 and 42688-P dual gyroscopes
3. 512MB high-capacity black box storage
4. Bluetooth parameter tuning
5. Upgraded Type-C USB interface
6. Plug-and-play, no soldering required
7. Integrated barometer
8. Features 7 UART ports
9. Independent BEC with 12V@2.5A and 5V@3A outputs
10. Equipped with the GEP-BL32 50A 96K 4IN1 32Bit ESC for a smooth flight experience
Note: pre-installed with BL32 test firmware, extensively tested for safety and reliability
(AM32 also supported; customer flashing required)

Specifications--TAKER H743 BT 32Bit 50A Stack

• FC model: TAKER H743 BT Flight Controller

• MCU: STM32H743

• IMU: MPU6000 + ICM42688-P(dual gyro)

• Air Unit Connection: direct plug for D JI Air Unit

• Black Box: 512M onboard

• Bluetooth: Supported

• Barometer: Supported

• USB Interface: Type-C 

• OSD: BetaFlight OSD w/ AT7456E chip

• BEC Output: 5V@3A,12V@2.5A dual BEC

• Target: GEPRC_TAKER_H743

• Dimension: 38.5x38.5mm, mounting hole size 30.5x30.5mm

• Input Voltage: 3-6S LiPo 

• UART Ports: 7 groups (UART3 fixed for Bluetooth)

• Power Filtering: Integrated LC filter

• Weight: 8.4g

• ESC Model: GEP-BL32 50A 96K 4IN1 ESC

• Input Voltage: 3-6S Lipo

• Continuous Current: 50A

• Peak Current: 55A（5 seconds）

• Supported Protocol: Dshot 150/300/600

• Size: 42.5x42.1mm, hole 30.5x30.5mm

• Weight: 14g

• Target: ST_G0_05 - 31.92

• Note: pre-installed with BL32 test firmware, extensively tested for safety and reliability(AM32 is also supported, customer flashing is required)

Includes

1 x FC board
1 x ESC board
1 x Capacitor
1 x O3 3-in-1 connection cable
1 x FC adapter cable
1 x sh1.0 4pin silicone cable
1 x Camera connection cable
1 x VTX connection cable
1 x Buzzer connection cable
1 x XT60 power cable
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts
12 x Silicone anti-shake pads