Holybro 18089 Remote ID WIFI / Bluetooth Supported in PX4 / Ardupilot CAN/Serial Protocol For RC Model / UAVs / / Airplane
19 orders (reference)
Description
Overview
Holybro RemoteID Module is low cost, small size, and light weight module that broadcast information about UAVs in flight through WIFI & Bluetooth. It supports both CAN and serial protocols. It is a FCC & CE approved radio module.
The products run open-source firmware (ArduRemoteID) and provides a so-called standard Remote ID solution, primarily target drone manufacturers & system integrators.
Note: This products is design for Standard Remote ID Solution, primarily target drone manufacturers & system integrators, as you need do you own approval process at the FAA (DoC submission) if you are in the USA. For the accurate & latest information related to this topic, please refer to the official governance website of your country.
If you need customization or have special request, feel free to reach out to us via email.
Radio module:
Espressif ESP-C3 module
Bluetooth and WiFi 2.4GHz (ERP): + 20 dBm (100 mW)
FCC & CE certified radio module
Firmware:
ArduRemoteID (https://github.com/ArduPilot/ArduRemoteID).
Supports upgrading firmware via the web interface ("OTA")
Supported in PX4 & Ardupilot (More Info)
Protocol: CAN & Serial
Interface:
1x JST GH 4-pin CAN (CAN) port
1x JST GH 6-pin TELEM (UART) port
Antenna Connector type:
On CNC Case: SMA connector
On PCB: IPEX Connector
Range: > 5km detection range*
Power: 5V supplied from TELEM or CAN port
LED lights: Bright RGB status LED
Size:
Without case: 35.3 x 23.5 mm (not including antenna)
With CNC case: 38 x 26.5 x 11.5 mm (not including antenna)
Mount: M2 screws
Operating temperature: -40°C to +85°C
Weight:
PCB only: 4 g
With CNC case & Antenna: 27.5g
Without case & Antenna: 16.5g (Cable 20cm)
Certification: FCC& CE
- The detection range depends on many factors such as the receiver antenna gain, transmission protocol, weather conditions, flying height, receiver height line of sight etc. With professional receivers a range of 5 km and more is possible.
With Case (18089)
Without case(18089A)
Specifications
| Option | Values |
|---|---|
| Type |
|
Product Details
Overview
Holybro RemoteID Module is low cost, small size, and light weight module that broadcast information about UAVs in flight through WIFI & Bluetooth. It supports both CAN and serial protocols. It is a FCC & CE approved radio module.
The products run open-source firmware (ArduRemoteID) and provides a so-called standard Remote ID solution, primarily target drone manufacturers & system integrators.
Note: This products is design for Standard Remote ID Solution, primarily target drone manufacturers & system integrators, as you need do you own approval process at the FAA (DoC submission) if you are in the USA. For the accurate & latest information related to this topic, please refer to the official governance website of your country.
If you need customization or have special request, feel free to reach out to us via email.
Specification
Radio module:
Espressif ESP-C3 module
Bluetooth and WiFi 2.4GHz (ERP): + 20 dBm (100 mW)
FCC & CE certified radio module
Firmware:
ArduRemoteID (https://github.com/ArduPilot/ArduRemoteID).
Supports upgrading firmware via the web interface ("OTA")
Supported in PX4 & Ardupilot (More Info)
Protocol: CAN & Serial
Interface:
1x JST GH 4-pin CAN (CAN) port
1x JST GH 6-pin TELEM (UART) port
Antenna Connector type:
On CNC Case: SMA connector
On PCB: IPEX Connector
Range: > 5km detection range*
Power: 5V supplied from TELEM or CAN port
LED lights: Bright RGB status LED
Size:
Without case: 35.3 x 23.5 mm (not including antenna)
With CNC case: 38 x 26.5 x 11.5 mm (not including antenna)
Mount: M2 screws
Operating temperature: -40°C to +85°C
Weight:
PCB only: 4 g
With CNC case & Antenna: 27.5g
Without case & Antenna: 16.5g (Cable 20cm)
Certification: FCC& CE
* The detection range depends on many factors such as the receiver antenna gain, transmission protocol, weather conditions, flying height, receiver height line of sight etc. With professional receivers a range of 5 km and more is possible.
With Case (18089)
Without case(18089A)
