iFlight iPower GM3506 Brushless Gimbal Motor / UAV pod motor / Turntable Airborne Lidar pod motor with Integrated Magnetic Ring

Description： The GM35 series motor by iPower Motors is the ultimate brushless gimbal motor for SLR and similar weight Cameras. This motor is designed for large-scale multi-rotor platforms looking to lift SLR sized gear – 1.5KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo. Specifications Model: GM3506 Motor Out Diameter: Ф40±0.05mm Motor Height: 17.8±0.2mm (Included with Encoder housing) Hollow Shaft(OD): Ф12-0.008/-0.012 mm Hollow Shaft(ID): Ф8.6+0.05/0 mm Wire Length: 610±3mm Cable AWG: #24 Motor Weight: 64±0.2g Wire plug: 2.5mm dupont connector No-load current: 16V No-load volts: 0.17±0.05 A No-load Rpm: 2149~2375 RPM Load current: 12V Load volts: 1A Load torque(g): 600-1000 Motor internal resistance: 5.6Ω±5%（Resistance varies with temperature） High voltage test: DC500V 1mA @2sec Rotor housing runout: ≤0.1mm Steering (axle extension): clockwise High-low temperature test: High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature Maximum power: ≤25W Working current: 2-3S Working temperature: -20~60℃;10~90%RH Package included: 1 x GM3506 gimbal motor The GM35 series motor by iPower Motors is the ultimate brushless gimbal motor for SLR and similar weight Cameras. This motor is designed for large-scale multi-rotor platforms looking to lift SLR sized gear – 1.5KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo. Specifications Model: GM3506 Motor Out Diameter: Ф40±0.05mm Motor Height: 17.8±0.2mm (Included with Encoder housing) Hollow Shaft(OD): Ф12-0.008/-0.012 mm Hollow Shaft(ID): Ф8.6+0.05/0 mm Wire Length: 610±3mm Cable AWG: #24 Motor Weight: 64±0.2g Wire plug: 2.5mm dupont connector No-load current: 16V No-load volts: 0.17±0.05 A No-load Rpm: 2149~2375 RPM Load current: 12V Load volts: 1A Load torque(g): 600-1000 Motor internal resistance: 5.6Ω±5%（Resistance varies with temperature） High voltage test: DC500V 1mA @2sec Rotor housing runout: ≤0.1mm Steering (axle extension): clockwise High-low temperature test: High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature Maximum power: ≤25W Working current: 2-3S Working temperature: -20~60℃;10~90%RH Package included: 1 x GM3506 gimbal motor