ToolkitRC M8D Smart Charger 2CH Touch Screen Dual Channel DC800W*2 30A 1-8S Lithium Battery Fast Charge RC Model Car FPV

ToolkitRC has added a new member, M8D touch screen dual channel charger

1. The first touch screen charger DC800W*2 30A, 1-8S lithium battery

2. Extra large flip screen, comfortable angle customization

3. 65W fast charging, supports fast charging of daily electronic devices

4. Battery destruction function

5. Synchronous mode can reach up to 50A

6. Double-bearing stepless speed-adjustable fan

Note: The firmware program of this product is updated and upgraded irregularly. If some functions of the product are missing or incomplete, it is necessary to wait for the firmware update. This situation is not a quality issue.

Notice: Please record the entire process of signing for the package and checking if the goods are in good condition. The logistics information on the packaging should be clearly visible in the video. After opening the packaging, the label information of the goods should be clearly visible, and then the packaging of the goods should be opened for inspection. If there are any issues with the product, please submit the required video. Failure to submit a dispute video as required will be considered an invalid dispute.

Warning:

【EN】WARNING: CHOKING HAZARD - Small parts. Not for Children under 3
years.

【FR】AVERTISSEMENT: RISQUES D'ÉTOUFFEMENT - Pièces de petites dimensions. Ne convient pas aux enfants de moins de 3
ans.

【ES】ADVERTENCIA: PELIGRO DE ASFIXIA: Piezas pequeñas. No apto para niños
menores de 3 años.

【DE】WARNUNG: ERSTICKUNGSGEFAHR – Kleine Teile. Nicht für Kinder unter
3 Jahren.

【IT】AVVERTENZA: PERICOLO DI SOFFOCAMENTO-Piccole parti. Non adatto ai
bambini sotto i 3 anni.

【PL】OSTRZEŻENIE: RYZYKO ZADŁAWIENIA SIĘ – Małe części. Nieprzeznaczone
dla dzieci w wieku poniżej 3 lat.

Q&A:

1. When there is an error in the device's functionality, please download a new program from the official product website and upgrade it. After the upgrade is complete, restore the factory settings and it can be used normally.

2. When suddenly shutting down and restarting during the charging process, please check if the power of your power adapter is below the charging requirements. It is recommended to reduce the charging speed.

3. After the charger is powered on, it repeatedly restarts. There is dust in the TF memory card slot. Please remove the TF memory card, wipe it clean, and then insert it into the charger to restore normal operation.

4. The discharge speed is a fixed interval speed and cannot perform rapid discharge.

5. Long term high-speed charging is not allowed. After completing high-speed charging, a battery needs to be cooled before use, otherwise it will burn out.

6. During the charging process, it is not allowed to enter the settings page. You need to stop charging before entering the settings page.

7. The parallel charging mode must be learned to use first. If the wrong wire is connected or the parallel charging mode is used incorrectly, the charger will be burned out.

8. Only batteries with high discharge rates can be charged quickly. If the battery has a slow discharge rate, it cannot be charged quickly, otherwise it will damage the battery or charger.

9. After upgrading to the latest firmware, some functions still cannot be used normally. You can send a video of the malfunction to the brand's email, and the brand will create a new firmware for consumers to upgrade and fix the vulnerability. This situation is not a quality issue.