VIFLY WhoopStor 3 V3 6 Ports 1S LIPO LiHV Battery Charger Discharger Storage LCD TYPE-C DC TX60 For FPV Drone BT2.0 PH2.0

What's new of WhoopStor 3?

1. Increase the maximum charge current from 0.9A to 1.3A, charges much faster especially for large capacity batteries like 850mah.

2. Open the tooling for the case around, no exposed parts any more.

3. Change to a colorful LED screen, each cell current also can be displayed.

4. Add the fan and big heatsink for heat dissipating, the discharging efficiency improves a lot.

5. Add the buzzer to beep when the charging circle finishes.

6. Add the feature of remembering the last current setting, no need to set the current each time.

7. Support 6S battery input.

8. Remove all switches, all operations are through the two buttons, that is much easier

Main Features:

• Storage Charger and Discharger

VIFLY WhoopStor 3 is a combination of charger and discharger. It has 4 target voltages (3.8V/3.85V/4.2V/4.35V), set your target voltage like 3.8V (LiPo Storage Voltage), it will start the charging or discharging process automatically when the battery is lower or higher than 3.8V.

• Colorful LCD Screen, Intuitive Interface

VIFLY WhoopStor 3 installs high quality LCD screen, the charging status is displayed clearly and the intuitive interface makes the
operation very simple.

• Fast Charge Speed

The charge current range is from 0.3A to 1.3A, you can choose different charge current for different size batteries, it is better to
charge the battery with 2C rate.

• Multiple power input

Supports Type-C, XT60 and DC Input, Type-C used PD protocol that supports fast charge, but not supports 5V input.

• Strong Heat Dissipation Capability

The fan and big heat sink would effectively dissipate the heat to prevent the unit from overheating. This greatly improves the efficiency and speed of the discharging.

• Memory Function

VIFLY WhoopStor 3 added the memory feature of remembering last time settings, no need to set the charge current every time you turn it on.

Specification: